Most single-storey houses in Western Sydney are well covered by four to six cameras. The usual pattern is one camera on the front door, one on the driveway and garage, one on each side passage or gate, and one on the back yard and rear doors. Two-storey homes and corner blocks often need six to eight, because there are more approaches to cover. The right number comes from counting the ways someone can reach your doors and windows, not from the size of a kit. Choose a recorder with spare channels so you can add cameras later.
Updated October 2026. This guide explains how to work out how many security cameras you need and where to put them. It covers typical camera counts, placement, mounting height, night vision, 4 versus 8 channel recorders, resolution, privacy and small businesses. The numbers are common starting points, not rules. Every property is different, so get an on-site assessment before deciding.
The short answer: count your approaches
Walk around your property and list every way a person can reach a door, window or valuable item. For most homes the list is short:
- The front door and porch, where visitors and couriers arrive.
- The driveway and garage, where cars, tools and bikes sit.
- Side passages and gates, the usual route to the back of the house.
- The back yard and rear doors, which are out of sight from the street.
Victoria Police’s advice on installing CCTV at home (updated 17 April 2025) also suggests covering all entry and exit points and the driveway. Give each approach its own camera, then add more only where one camera cannot see the whole area.
Typical camera counts by property type
These are common starting points based on how many approaches each type of property usually has, not survey data. Block shape, fences, trees and lighting will change the answer.
| Property | Typical cameras | Why |
|---|---|---|
| Single-storey house | 4 to 6 | Front door, driveway, one or two side passages, back yard. Add one if the rear has two separate doors. |
| Two-storey house | 6 to 8 | The same ground-floor approaches, plus a larger footprint, longer side passages and sometimes a rear balcony or second garage. |
| Townhouse or duplex | 2 to 4 | Usually a front entry, a garage and a small courtyard. Shared walls mean fewer approaches. Strata approval may be needed. |
| Small shop or office | 4 to 8 | Front entry, counter or register, rear door or loading area, stock room and the car park if you lease it. |
| Warehouse | 8 to 16 or more | Gates, roller doors, loading docks, the yard, perimeter fences and key aisles inside. Usually designed after a site walk. |
Corner blocks and homes backing onto reserves or laneways often need one or two more, because they have an extra exposed side.
Where to put security cameras, point by point
Front door and porch
Aim to capture a clear face as someone reaches the door. Mount the camera beside or above the door, angled slightly down the path, rather than directly overhead. A camera looking straight down mostly records the top of a head or a cap. A video doorbell helps, but it does not replace a wider camera on the front yard.
Driveway and garage
A driveway camera should show cars arriving, people beside them and anyone at the garage door. Mount it on the garage wall or eave and point it down the driveway. Number plates usually need a separate camera (see below).
Side gates and passages
In a narrow passage, a camera mounted too high or too wide may show only a thin strip of movement, as SecurityWholesalers notes in its security camera placement guide (reviewed 15 July 2026). Point it along the passage so people walk towards it.
Back yard and rear doors
The back yard is out of view of the street. Cover the rear and sliding doors first, then the yard and back fence. On large blocks, one camera for the doors and one facing the yard is a common layout.
Ground-floor windows
You rarely need a camera for every window. Aim the side and rear cameras so they also take in the windows along those walls. Windows hidden behind sheds or hedges may need their own camera.
Inside the home
Indoor cameras are optional. If you want one, cover the main hallway or the room inside the most likely entry point, never bedrooms or bathrooms.
Mounting height, angles and two-storey homes
There is no single required height for home cameras. It is a trade-off between staying out of reach and seeing faces. eufy’s Australian security camera mounting height guide (updated 21 July 2026) suggests about 2.4 to 3 metres for outdoor cameras. It suggests about 2.5 metres with a gentle downward tilt where you want to identify faces. Indoors, it suggests about 2 to 2.3 metres in a corner.
On a two-storey house, the same guide suggests mounting at around first-floor level rather than at the highest point of the roof. Very high cameras see a lot of ground but little facial detail. A good two-storey layout uses ground-floor eaves or the garage wall for entry cameras, with an upper-level camera only for a wide overview.
Whatever the height, angle cameras so people walk towards them, not across the frame.
Lighting, glare and night vision
Check every camera at night before the installer leaves. Common problems:
- Backlight. A camera facing a bright street, the western sun or a sensor light will turn people into silhouettes.
- Reflections. White garage and roller doors, polished cars and wet concrete can bounce infrared light back into the lens, as the SecurityWholesalers placement guide notes.
- Eaves and walls. Infrared light hitting a nearby gutter, wall or spider web can wash out the picture.
- Sensor lights. Victoria Police suggests pairing cameras with sensor lights. Extra light also helps colour night vision.
Weather protection
Western Sydney summers are hot and storms can be heavy. Mount outdoor cameras under eaves where possible, away from direct afternoon sun and driving rain. Check the spec sheet shows an outdoor weatherproof (IP) rating and a suitable temperature range, and seal cable entry points.
Cameras versus recorder channels: 4 vs 8 camera systems
Most wired systems record to a network video recorder (NVR). Each recorder has a set number of channels, usually 4, 8 or 16, and each channel handles one camera. Many NVRs have power over Ethernet (PoE) ports, so one cable carries power and video.
A common mistake is buying a 4-channel recorder for four cameras, leaving no spare channel for a later side-gate or shed camera. SecurityWholesalers’ CCTV cost by camera count guide (reviewed 1 September 2026) recommends an 8-channel recorder for a four-camera system where expansion is realistic. A site that will fill all eight may be better served by a 16-channel recorder. More cameras also need more storage, so ask how many days of recording you will get.
Deciding between cable and Wi-Fi? See our guide to wired vs wireless security cameras.
Lens, field of view and resolution
Wide or narrow lens
A camera with a short focal length (for example 2.8 mm) gives a wide view but less detail at a distance. A longer focal length gives a narrower view with more detail further away. Varifocal cameras can be adjusted on site. Wide suits a porch or courtyard; narrower suits a long driveway or a distant gate.
Detecting, recognising and identifying
What matters is how many pixels land on the person, not megapixels alone. Many camera makers describe this using the DORI levels from the international standard IEC 62676-4. Omada’s explainer on DORI (updated 18 September 2026) lists these pixel densities across the scene:
- Detect (is someone there?): 25 pixels per metre
- Observe (clothing and what they are doing): about 62 pixels per metre
- Recognise (is this someone seen before?): 125 pixels per metre
- Identify (who is this, beyond reasonable doubt?): 250 pixels per metre
To estimate pixels per metre, divide the camera’s horizontal pixels by the width of the scene where the person will be. A 4MP camera is typically 2,560 pixels wide, so it reaches the identification level only where the view is about 10 metres wide. An 8MP (4K) camera, typically 3,840 pixels wide, reaches it where the view is about 15 metres wide. So a wide camera covering a whole yard rarely identifies a face at the far fence. Put identification cameras where people pass close, such as doors and gates.
Australia’s own CCTV application guidelines, AS 4806.2 (published 2006), are listed as withdrawn on the Standards Australia store, and many camera spec sheets now quote DORI distances instead.
Number plates
Reading number plates, especially at night, usually needs a camera set up just for that job. It should have a narrow view of the spot where cars slow down, such as a driveway entrance or a gate. Our NSW CCTV laws guide covers the rules on number plate recognition.
Privacy limits: what not to point cameras at
Cameras should cover your own property. Victoria Police’s home CCTV advice says to avoid angles that capture your neighbours’ property. In practice:
- Keep cameras off neighbours’ windows, back yards, pools and other private areas. Use privacy masking in the camera settings if a view cannot be avoided.
- Switch audio recording off unless you have checked the rules first.
- In a strata building or a rental, get approval before installing anything on common property or the building itself.
Our guide to CCTV laws in NSW explains the Surveillance Devices Act, workplace surveillance and audio recording in detail. For apartments and townhouses, see CCTV for strata buildings in NSW.
Small businesses: what changes
The counting method is the same, but priorities shift. A small shop or office typically needs cameras on the entry door at face height, the counter or register, the rear or loading door, and stock areas. Add car park or yard cameras if you control those areas. Warehouses also need roller doors, gates and the perimeter covered.
Business systems usually need longer recording periods and someone who can export footage quickly. If you have staff, read the workplace surveillance section of our NSW CCTV laws guide before any cameras go up.
What it costs
Our CCTV installation cost guide for Western Sydney covers prices in detail. As a guide, The Quote Yard’s NSW CCTV installation price guide (published 23 September 2026) lists about $1,200 to $2,400 for a 4-camera wired system in Western Sydney, and about $2,500 to $4,900 for 6 to 8 cameras. The SecurityWholesalers camera count guide gives a wider indicative range of $1,500 to $4,000 for four cameras and $3,000 to $6,500 or more for eight. These are published planning figures, not Mac-Tek prices. Cable runs, camera quality and storage make the biggest difference, so get a written on-site quote.
Frequently asked questions
How many security cameras do I need for a normal house?
Most single-storey houses start with four to six: front door, driveway, side passages and the back yard. Two-storey homes and corner blocks often need six to eight.
Is a 4 camera system enough?
For a small house or townhouse with one side passage, often yes. Most detached homes are left with a gap somewhere. Choose an 8-channel recorder so you can add cameras later without replacing it.
What is the standard height for a CCTV camera?
There is no single required height for homes. Published guidance commonly suggests about 2.4 to 3 metres for outdoor cameras, and lower, around 2.5 metres, where you need to see faces clearly.
Where should cameras go on a two-storey house?
Put entry cameras at ground-floor eave or garage-wall height so they capture faces. Use an upper-level camera only for a wide overview of the yard or driveway, not for identification.
How much does it cost to install 4 security cameras?
The Quote Yard’s September 2026 NSW guide lists about $1,200 to $2,400 for a 4-camera wired system in Western Sydney, supplied and installed. Our CCTV cost guide explains what changes the price.
Mac-Tek Telecom designs and installs CCTV and security camera systems and home security cameras for homes and businesses across Penrith, Blacktown, Parramatta, Mount Druitt, St Marys and Western Sydney. Book a free on-site quote or call 0411 126 995. We will walk your property with you and mark out each camera position before we give you a written price.



