A local alarm only sounds a siren on site. A self-monitored alarm also sends an alert to your phone, and it’s up to you to respond. A back-to-base alarm reports to a licensed monitoring centre. The centre follows your instructions, usually by calling your contacts, and if you choose, it sends a patrol. Published 2026 price guides put home back-to-base monitoring at about $30 to $60 a month. Self-monitoring has no monitoring fee, but you can miss an alert. If someone needs to act on an alarm whenever it goes off, choose back-to-base.
Updated November 2026. This guide explains the three ways an alarm can be monitored and what a monitoring centre actually does when your alarm goes off. It also covers the licences and Australian Standards that apply in NSW, what monitoring costs, and how your alarm reports in now that 3G is gone. The prices are published market ranges, not Mac-Tek prices.
The options at a glance
| Local (siren only) | Self-monitored | Back-to-base | |
|---|---|---|---|
| Who is alerted | Anyone within earshot | You, through an app or SMS | A licensed monitoring centre, then your contacts |
| Who responds | Nobody, unless a neighbour acts | You | The centre follows your written response plan. A patrol is usually an optional extra |
| Ongoing cost | None | None for monitoring, though apps, cloud storage or a SIM may cost extra | About $30 to $60 a month for homes (2026 guides), plus patrol fees |
| Best for | Low-risk sites, or as a deterrent only | People who are nearly always reachable and close by | Businesses, homes left empty for long periods, and anyone who wants a guard sent |
Local alarms
A local alarm has no way to communicate with anyone. When a sensor is triggered, the internal and external sirens sound, and that’s it. It can still scare off an opportunistic intruder, but it relies on a neighbour hearing the siren and doing something. Castle Security’s monitoring guide describes unmonitored alarms in exactly those terms.
Self-monitored alarms
A self-monitored alarm has a communicator, usually a Wi-Fi, IP or 4G module, that sends alerts to an app on your phone. Most modern panels can also be armed and disarmed from the app.
The appeal is that there’s no monthly monitoring fee. The catch is that everything depends on you. Castle Security notes that self-monitoring “leans on you” to respond, and Jim’s Security points out that no monitoring centre is alerted to dispatch anyone. If your phone is on silent, flat, out of range or overseas, nobody acts on the alarm. Security Wholesalers’ alarm monitoring cost guide also suggests checking for app, cloud and SIM fees before assuming self-monitoring is free.
Self-monitoring suits people who work from home or close by, check their phone constantly, and have a neighbour who can look in.
Back-to-base monitoring
With back-to-base monitoring, the alarm reports to a monitoring centre that is staffed around the clock. NSW Police’s security licensing directorate (SLED) explains in its licensing FAQs that a monitoring centre operator’s main duty is to monitor alarm systems and act on activations “in accordance with client instructions”. Operators don’t go to the site themselves, but those instructions can include sending other licensed security staff.
In practice, you agree a response plan when you sign up. It typically sets out:
- who the centre calls, and in what order
- a password or code word, so the centre knows it’s really you when you say it was a false alarm
- whether a patrol is sent, and when (for example, only if nobody on the list answers)
- open and close reporting for businesses, so the centre knows if the alarm wasn’t set at closing time
Patrols are usually priced separately from monitoring. NRMA Security, for example, lists response patrols as an optional extra on top of 24/7 monitoring, and says licensed security staff attend according to your response plan. Patrol companies generally charge per attendance, often with a set time on site before extra charges apply, and a false alarm can cost as much as a real one. Get the call-out fee in writing before you sign.
Video-verified monitoring
Some providers add cameras to the alarm so the monitoring centre can see what triggered it. ADT describes systems that send short video clips to both you and its monitoring centre, where operators check whether the event is genuine. This helps cut false call-outs, and it’s especially useful on business sites where a patrol costs money every time it attends. It usually costs more each month than standard monitoring.
Licences and standards in NSW
Alarm monitoring and installation are both licensed security activities in NSW under the Security Industry Act 1997. NSW Police’s licensing pages list:
- Class 1E, Monitoring Centre Operator: monitors security alarm activations for property protection (Class 1 licences).
- Class 1A, Security Officer: held by guards who physically respond to alarms.
- Class 2C, Security Equipment Specialist: sells, installs, maintains, repairs and services security equipment, including alarm systems (Class 2 licence subclasses).
A business that provides these services also needs a master licence. Our guide to security licences for CCTV and alarms in NSW covers this in more detail, and you can check any licence number through SLED before you sign up.
Three Australian Standards are worth knowing by name:
- AS/NZS 2201.1 covers designing, installing, commissioning and maintaining intruder alarms at your premises.
- AS 2201.2:2022 sets requirements for monitoring centres, including their construction, equipment, staff and operation. It also sets out a grading system.
- AS/NZS 2201.5 covers how alarm signals are sent from your premises to the monitoring centre.
Monitoring centres are graded with a letter and a number. The letter (A to C) rates the building, services and physical security. The number (1 to 3) rates equipment and staff. The New Zealand Security Association explains the same joint grading scheme. A1 is the highest grade. In Australia, ASIAL runs the grading scheme and publishes a list of graded centres. Not every home needs an A1 centre, but it’s reasonable to ask a provider which grade its centre holds and whether it has a backup site. If your insurer specifies a grade of monitoring, check that the centre meets it.
What does monitoring cost?
As of 2026, published Australian guides give these ranges for homes:
- Security Wholesalers (prices checked 1 September 2026): about $30 to $60 a month for professional monitoring.
- Castle Security (May 2026): $15 to $60 a month for professional monitoring, on contracts of 12 to 36 months, with possible cancellation fees.
- NRMA Security: back-to-base monitoring from $35 a month, with patrols an optional extra.
Business monitoring usually costs more, especially with open and close reporting, video verification or a retained guard response. Watch for these when comparing quotes:
- Contract length. The cheapest monthly rate usually comes with a 24 to 36 month term. Check the exit fee and whether the contract rolls over automatically.
- Patrol and false-alarm charges. These are often billed per attendance, on top of the monthly fee.
- The communicator. An alarm without a working IP or 4G communicator can’t report to anyone. Retail prices for 4G alarm communicators such as the Permaconn PM45 4G and Ness 4G dialler were about $260 to $330 in November 2026, for the part alone, before installation and programming.
- Who owns the equipment. Some “free install” offers lock the panel to one monitoring company.
These are market ranges, not Mac-Tek prices. Your cost depends on the panel, the communicator, the response plan and the contract. For the cost of the alarm system itself, see our guide to how much a security alarm costs in Sydney.
How your alarm reports in: 3G, nbn and dual-path
Monitoring is only as reliable as the path the alarm uses to reach the centre. Two changes have caught out a lot of older systems.
The 3G shutdown. Telstra and Optus began switching off their 3G networks from 28 October 2024, and TPG had already closed its own, according to business.gov.au. An alarm with an old 3G communicator may still sound on site but no longer reach its monitoring centre. Our 3G alarm guide explains how to check yours safely.
Phone-line diallers on the nbn. Older alarms that dial out over a phone line may not report reliably once the line moves to the nbn. nbn says on its security alarms page that your alarm provider can advise whether the alarm will work on the nbn, and suggests asking whether it will keep working in a blackout.
The usual fix is an IP or 4G communicator, ideally dual-path. A dual-path unit such as the Permaconn PM45 uses the internet as its main path and falls back to 4G if that fails. Many monitoring centres also “poll” the communicator, which means they notice and alert you if the alarm stops checking in, rather than discovering the problem during a break-in.
Does monitoring lower your insurance?
Sometimes, but don’t assume it. Finder notes that many insurers offer lower premiums for homes with effective security, and advises checking with your insurer. It also warns that if you get a discount for an alarm, you may need to keep it working and tested, and that a broken or poorly maintained alarm could put a claim at risk. Read your policy’s PDS, tell your insurer about the alarm, and keep your service records.
Which should you choose?
- Self-monitoring is fine if you’re almost always reachable and close by, the property is rarely empty for long, and you have someone nearby who can check on it.
- Back-to-base makes sense for businesses, warehouses and shops after hours, homes that are often empty, older residents living alone, and anyone whose insurer asks for it.
- Video-verified back-to-base suits sites where false call-outs would get expensive, or where you want a guard sent only for genuine events.
Whichever you choose, the alarm should be able to switch between them. Most current panels can be self-monitored now and connected to a monitoring centre later without replacing the system.
Frequently asked questions
What is the difference between back-to-base and self-monitoring?
With self-monitoring, the alarm alerts your phone and you decide what to do. With back-to-base monitoring, the alarm reports to a licensed monitoring centre that follows your response plan, such as calling your contacts and, if you’ve arranged it, sending a patrol.
How much does back-to-base monitoring cost?
Published 2026 guides put home monitoring at about $30 to $60 a month, with entry offers from around $35. Patrol call-outs and false alarms are usually charged on top. Business monitoring generally costs more.
Will the police come if my alarm goes off?
Not automatically. A monitoring centre acts on your instructions, and its operators don’t attend the site themselves. If you want someone to go, arrange a licensed patrol as part of your response plan. Call 000 yourself if you believe a crime is happening.
Can I switch from self-monitoring to back-to-base later?
Usually, yes. Most current panels with an IP or 4G communicator can be connected to a monitoring centre later. Some panels supplied under monitoring contracts are locked to one provider, so check before you buy.
Does my alarm still work without a phone line?
It still sounds on site, but it may not be able to report to anyone. Alarms that relied on a phone line or 3G usually need a new IP or 4G communicator to keep being monitored.
Mac-Tek Telecom installs and upgrades alarm systems for homes and businesses across Penrith, Parramatta, Blacktown, Mount Druitt, St Marys and Western Sydney (NSW Master Security Licence 100034). We can set your alarm up for self-monitoring through an app, or for back-to-base monitoring, and fit a 4G or dual-path communicator so it keeps reporting. Book a free on-site quote or call 0411 126 995.



