NBN Lead-In Conduit Blocked or Broken? Who Fixes It and What It Costs

Protect What Matters. Connect What Counts.

The lead-in conduit is the pipe that runs underground from the nbn pit at your front boundary to the side of your house. If the nbn technician finds it blocked or broken, nbn treats the job as a complex installation. The technician may leave and come back, and you keep your current service in the meantime. nbn will generally try to use the existing conduit. If it can’t, it may bury the fibre directly in your yard, but only with your consent. Otherwise you can provide a new pathway to nbn’s specification at your own cost. That usually means a short trench and a white P20 conduit. Most of the cost is the digging: what’s in the way, such as a driveway or paving, matters more than the length.

Updated November 2026. This guide explains who owns which part of the lead-in, what nbn does when the conduit is blocked, the specification for a new conduit, who can do the work, and what it typically costs. It’s written for owners in Western Sydney, where older homes can have conduits that are cracked, full of roots or missing altogether.

The short version

Question Short answer Source
Who owns the street pit and the fibre cable? nbn, up to the network boundary nbn Authority to Alter
Who provides a new conduit on my land? You, if nbn can’t use the existing one and you don’t want the cable direct-buried nbn upgrade FAQs and pathways factsheet
What conduit? Rigid white P20 (23 mm) telecommunications conduit, 300 mm deep (450 mm under a driveway, 500 mm maximum) nbn pathways factsheet
Who can lay it? nbn recommends a registered cabler, but others can do it if they follow nbn’s specification nbn pathways factsheet
Can I touch nbn’s fibre cable? No. Only nbn works on the lead-in cable from the street nbn Authority to Alter
Do I need to call Before You Dig? Yes. In NSW it’s a legal requirement before digging near electricity or gas BYDA

What the lead-in conduit is, and who owns what

nbn’s fibre cable pathways factsheet describes two pathways. The lead-in conduit runs from where the cable enters your property from the street to the nbn utility box on the outside of your home. The in-premises conduit runs from the utility box to the nbn connection box inside.

Ownership splits at the boundary:

  • nbn’s side. The pit in the footpath, the short conduit that usually ends about a metre inside your boundary, and the fibre cable itself belong to nbn. Its Authority to Alter says nbn generally owns the facilities it provides up to the network boundary. It also says no work may be done on the fibre lead-in cable that comes in from the street.
  • Your side. nbn’s trenching requirements say that if a trench is needed on your property, it’s the owner’s responsibility to organise it. You must not dig outside your boundary, because that part is nbn’s responsibility.

Older pits in the street may still be Telstra’s. Local Government NSW’s guidance for councils notes that some older Telstra pits contain asbestos and that Telstra controls their remediation. Don’t break into or drill an old pit yourself.

Why conduits block

A 2025 research paper by UTS and nbn co engineers on cable installation in lead-in conduits describes a typical lead-in as about 20 metres long and no larger than P20. Earthworks or shifting soil can crack or separate the conduit, letting in dirt, mud, water, tree roots or even animals. Older homes may also have legacy conduit made of terracotta, earthenware or iron, or narrower pipe.

Common causes include:

  • a driveway, path or retaining wall built over the conduit, which crushed or cut it
  • tree roots entering through a cracked joint
  • a conduit end left uncapped, so soil washed in. The national Wiring Rules (AS/CA S009) warn about exactly this.
  • a pipe with too many bends for a rod or cable to get through
  • no conduit at all, where the old copper was direct-buried

What happens on installation day

nbn’s full fibre upgrade FAQs set out the sequence:

  1. The technician tries the existing conduit. nbn “will generally use existing lead-in conduit pathways where they’re available”.
  2. If it’s blocked, it becomes a complex installation. The technician may leave without finishing, though they may still install the utility box and connection box. Your provider reschedules, and you can keep using your existing service in the meantime.
  3. Direct bury may be offered. Where it’s safe, nbn may bury the fibre without a conduit at a minimum of 150 mm inside your boundary, in areas without heavy machinery or livestock. This is only done with the owner’s consent.
  4. Or you provide the pathway. If you don’t want a direct-buried cable, you may need to provide your own pathway that meets nbn’s standards, at your own cost. Then you tell your provider it’s ready so they can rebook nbn.

The free nbn installation covers nbn-supplied equipment only, according to nbn’s full fibre upgrade page. nbn doesn’t publish a promise to repair a blocked private conduit for free, so don’t assume it will.

Direct bury is quick and costs you nothing. But a cable just 150 mm down is easy to hit later with a spade, a garden edge or a fence post, and nbn says it won’t repair damage caused by a failure to take reasonable care. If you plan to landscape, pave or build along that side of the house, a proper conduit is usually the better choice.

The specification for a new lead-in conduit

nbn’s pathways factsheet sets out these requirements for a customer-installed lead-in:

  • A continuous rigid white P20 telecommunications conduit (23 mm internal diameter). Orange or corrugated conduit must not be used.
  • Depth: at least 300 mm, at least 450 mm under a driveway, and no deeper than 500 mm.
  • No more than two 90-degree bends, with a minimum bend radius of 300 mm. Sweeping bends are preferred.
  • All joints glued with PVC solvent cement.
  • A nylon drawstring inside, taped and sealed at both ends.
  • Where an existing conduit can’t be used, the new one goes next to the existing conduit at the boundary, typically about a metre inside it. Leave the boundary end exposed so nbn can connect it to the street conduit.
  • At the house, finish at least 400 mm above ground.
  • Keep 300 mm from other underground services, 150 mm from power sources, water pipes, taps and meters, and 500 mm from air-conditioning units and gas meters.

nbn also strongly recommends getting its guidance, through a technician appointment, before you build an underground lead-in pathway. In some cases nbn can’t use a new pathway because of how its network is laid out, even if the pathway meets the specification.

Sharing a trench with power

The Wiring Rules (AS/CA S009:2020, free to download from Austelco) allow a telecommunications conduit to share a trench with low-voltage power with no separation in one case: the communications conduit is white and marked “COMMUNICATIONS”, and the power is in orange conduit marked “ELECTRICAL”. Otherwise, separation distances apply. Any new power work must be done by a licensed electrician.

Before you dig

In NSW, using the Before You Dig Australia referral service is a legal requirement before excavating near electricity or gas networks, and that includes most work on private property. Enquiries are free. BYDA notes that its plans are indicative and may not show services inside your boundary, so a professional locator is worth considering on a small block. Telstra also asks you to find its underground cables before you dig.

Who can do the work?

  • Laying the empty conduit. nbn recommends a registered cabler, but its factsheet says the work can be done by others, such as a landscaper, plumber or the owner, provided they follow all its requirements.
  • The fibre lead-in cable. Only nbn installs or works on the cable from the street. A private cabler must not pull, cut or move it.
  • Cabling inside your home. New data points, or moving the connection box, is customer cabling, which must be done by an ACMA-registered cabler under the Cabling Provider Rules. Our guide to moving your nbn connection box covers what can and can’t be moved.

How a blocked conduit is fixed

  1. Locate it. Find the boundary end and the house end. A PVC conduit can’t carry a tracing signal, so locators push a detectable rodder with a small transmitter (a sonde) along the pipe to find where it stops, as locating firms describe.
  2. Try to clear it. The UTS and nbn co paper describes technicians using semi-rigid fibreglass rods with different tips, rodding from the other end, or flushing the conduit with water. It also notes that crews sometimes wrongly assume a blockage and dig when they didn’t need to, so it’s worth trying properly from both ends first.
  3. Dig at the break. If the rodder stops at one point, a small hole at that spot to replace a metre of conduit is far cheaper than a full new run.
  4. Replace the run. If the conduit is crushed along its length, missing, or the wrong type, trench and lay new P20 next to the old one at the boundary.
  5. Bore under hard surfaces. Where the route crosses a driveway, slab or established garden, directional boring or a small horizontal bore can avoid cutting and replacing concrete.

What does it cost?

We couldn’t find a published Australian price for simply clearing a blocked nbn conduit, so treat any fixed price you see with caution. Published 2026 guides give these component costs:

  • Cabler’s time: Surequote’s 2026 cabler cost guide (October 2026) puts a cabler at about $100 an hour excluding GST, with after-hours work at 1.5 to 2 times that.
  • Vacuum excavation (digging safely near other services): iseekplant lists small trucks from about $150 to $225 an hour excluding GST, usually with a minimum three-hour call-out.
  • Directional boring under a driveway or path: iseekplant puts urban boring at about $30 to $65 per metre excluding GST, and more through rock, plus set-up costs.
  • Making good: cutting and replacing concrete or pavers often costs more than the conduit work itself, so ask for it to be priced separately.

For comparison, asking nbn to move its own lead-in is much more expensive. nbn’s relocation works cost guide lists lead-in relocations from $3,000 (inc. GST), plus a non-refundable application fee of $550 to $2,750. That’s a different job from fixing your own conduit, but it shows why fixing the pathway on your side is usually the cheaper route.

These are published market rates, not Mac-Tek prices. The real cost depends on the length of the run, what it crosses, the soil and the access, so an on-site look is the only way to price it accurately.

Renting or in a strata building?

  • Renters. NSW lists “installing any phone or internet access line” among the minor changes a landlord can’t unreasonably refuse. You need written permission, though, and unless the landlord agrees to pay, the tenant pays. nbn also asks renters to get the landlord’s permission because digging may be involved.
  • Strata. NSW says the owners corporation must repair and maintain common property, which generally includes driveways, gardens, pipes and cables. If the conduit runs through common property, talk to your strata manager before anyone digs.

If the connection is delayed

Your provider should tell you what’s needed to finish the connection and give you an estimated timeframe. If the delay drags on and you can’t resolve it with them, the Telecommunications Industry Ombudsman can look at complaints about connection delays. Delays are a growing complaint in NSW. In the TIO’s July to September 2025 report, NSW complaints about delays establishing a service rose 18.6%, and Blacktown was among the local government areas with the most complaints.

Frequently asked questions

Will nbn fix my blocked conduit for free?

nbn will try the existing conduit and may offer to bury the fibre directly in your yard with your consent. It doesn’t promise to repair a blocked conduit on your land for free. If you want a new conduit, it’s at your own cost.

Can I lay the new conduit myself?

nbn says the pathway can be built by people other than a registered cabler, provided they follow all its requirements, though it recommends a registered cabler. Lodge a Before You Dig enquiry first, and don’t touch nbn’s cable or the street pit.

What conduit do I need?

Rigid white P20 telecommunications conduit (23 mm), at least 300 mm deep (450 mm under a driveway), with no more than two 90-degree bends and a drawstring inside.

Is direct bury a bad idea?

Not always. It’s quick and free, but the cable is only about 150 mm down and easy to damage later. If you plan any landscaping, paving or building along that side of the house, a conduit is safer.

Do I lose internet while this is sorted out?

Not on an upgrade. nbn says you can keep using your existing service while a complex installation is completed.

Mac-Tek Telecom works across Penrith, Parramatta, Blacktown, Mount Druitt, St Marys and Western Sydney. We can locate a blocked lead-in, clear or repair the conduit, or lay a new P20 pathway to nbn’s specification so your connection can be rebooked. Book a free on-site quote or call 0411 126 995.

Related guides

Scroll to top
Call 0411 126 995Free quote