Clear footage of the areas your business can’t afford to miss.
CCTV for Warehouses, Shops and Offices.
Mac-Tek Telecom designs and installs commercial CCTV for warehouses, shops, offices and other business premises across Penrith and Western Sydney. We plan camera positions around your entries, stock, staff areas and vehicles, install the cameras and recorder, set up viewing on your phone and computer, and show your team how to find and export footage. Our security work is carried out under NSW Security Master Licence 100034, and every job starts with a free on-site quote.
A business system has to do more than record. The footage needs to be clear enough to use, kept for as long as you need it, and easy for the right people to find. NSW also has specific rules on telling staff about cameras, so we plan for those from the start.
Key Features
A Layout Planned Around Your Site
Recording Sized for Your Site
Footage That's Easy to Find
Number Plate Capture
More Than One Site
Works With Your Other Security
What to Cover, by Type of Business
Warehouses and industrial sites
Loading docks, roller doors, yards, gates, stock aisles and staff entries are the usual starting points. Long distances are the main design issue. A standard network cable run is limited to about 100 metres, so larger sites may need extra switches or an optic fibre link between buildings. High mounting points may also need a lift, and it’s worth checking this is in any quote you compare. Our guide to cabling and fibre for industrial sites has more detail.
Shops and retail
Entries, the counter, stockrooms and rear doors matter most. A counter camera should cover the transaction area without being able to read customers’ PINs.
Offices and professional suites
Reception, entry doors, car parks, after-hours access points and the comms room are the usual areas. In a shared building, check what the landlord or strata already covers, and what you’re allowed to fit, before you buy.
Multi-site businesses
Keeping the same setup at every site makes staff training and finding footage simpler. We can stage the work one site at a time.
NSW Rules Your Business Needs to Plan For
- Tell your staff first. The Workplace Surveillance Act 2005 generally requires at least 14 days’ written notice before camera surveillance starts, unless an employee agrees to less. New staff must be told before they start work.
- Keep cameras visible and put up signs. Under section 11, cameras must be clearly visible, with signs at each entrance to the monitored area.
- Some areas are off limits. Section 15 prohibits surveillance of staff in change rooms, toilets, showers and other bathing facilities.
- Be careful with audio. Section 7 of the Surveillance Devices Act 2007 restricts recording private conversations, so check before you turn on any microphone.
- Check the Privacy Act. It covers businesses with annual turnover above $3 million and some smaller ones. The OAIC says those organisations must tell people their image may be captured before they’re recorded, keep footage secure, and destroy or de-identify it when it’s no longer needed.
- Use a licensed installer. In NSW, installing security equipment as a business is licensed work.
This is general information, not legal advice. Our guide to CCTV laws in NSW goes further, and your solicitor can advise on your situation.
How It Works
- Site visit. We walk the premises with you, agree what each camera needs to show, and check cable paths, mounting heights and access.
- Written quote. It lists the cameras, the recorder and storage, the cabling, any lift hire or after-hours work, and any ongoing costs.
- Installation. We fit the cameras and recorder and run the cabling, working around your trading hours where we can.
- Handover. We set up viewing and show your team how to find and export footage.
What does it cost?
Published 2026 guides give these indicative ranges. They’re market estimates, not Mac-Tek Telecom’s prices.
| System | Published range | Source |
|---|---|---|
| Per commercial IP camera, installed in Sydney | $750 to $1,600, including GST | What’s The Damage? Sydney guide (updated November 2026) |
| Four-camera small business system in Sydney | $2,400 to $5,700, including GST | Same guide |
| Eight-camera high-resolution system in Sydney | $5,400 to $9,700, including GST | Same guide |
| Shop, clinic or small office, 4 to 8 cameras | $2,500 to $6,000 | Security Wholesalers (reviewed 1 September 2026) |
| Warehouse or multi-zone site, 8 to 16 cameras | $6,000 to $20,000 or more | Same guide |
The Security Wholesalers figures are planning ranges and don’t state whether GST is included, so confirm that when you compare quotes. The biggest factors are the number of cameras, the length of the cable runs, mounting height, recorder and storage size, and whether work has to happen after hours. Our CCTV cost guide goes through the detail, and an on-site visit gets you an exact written price.
Frequently Asked Questions
How long should a business keep its footage?
It depends on your site, how quickly you’d notice an incident and any requirements that apply to your business. If the Privacy Act covers you, footage must be destroyed or de-identified once it’s no longer needed. Decide on a period and we’ll size the storage to suit.
Do I need to tell my staff about the cameras?
Generally yes. In NSW, employees need at least 14 days’ written notice before camera surveillance starts, unless they agree to less. Cameras must be visible and signs must be up at each entrance to the area. Our CCTV laws guide explains what the notice should say.
Can you record audio?
Most cameras can, but recording private conversations is restricted in NSW. Get advice first if you think you need it.
I lease my premises. Can I still install CCTV?
Usually, but check your lease first, as alterations often need the landlord’s consent. In a strata building, anything on common property generally needs the owners corporation’s approval. See our strata and apartment security page.
Can we use the existing cameras or cabling?
Sometimes. Older systems can occasionally be reused or upgraded. We’ll check what you have on site and tell you what’s worth keeping.
Can you work outside our trading hours?
Tell us about any hours that suit or don’t suit your business, and we’ll include them in the quote. After-hours work can add to the price.
Does the installer need a licence?
Yes. In NSW, installing security cameras as a business requires a security licence. Mac-Tek Telecom’s work is carried out under NSW Security Master Licence 100034. Our licence guide explains what to ask any installer.
Guides & Service Areas
Related guides
- How much does CCTV installation cost in Western Sydney?
- CCTV laws in NSW: what home and business owners need to know
- How many security cameras do you need? A placement guide
- Wired vs wireless security cameras: which is better?
- Structured cabling and optic fibre for industrial sites in St Marys and Penrith
Related services
Where we work
Testimonials
Need cameras for your business? Book a free on-site quote.